Re: Europa-List: RE: Supplied cable is not 1/8

[DuaneFamly@aol.com]

Good Day All,

If you are using the Nico measuring tool, then all you are doing is  
measuring is that the 1/8" sleeve has compressed to the 1/8" required  
measurement.

But if the cable inside is less than 1/8" (3/32" in this  case) then you may not

get the required "bite" onto the cable and it may  fail (pull thru) if there 
is too much force applied. The tool measurement is  only right if all the 
correct parts are used.  

Mike Duane  A207A
Redding, California
XS Conventional  Gear