- 1. tip shape for stabilators (score: 1)
- Author: Peter Lert <plert@csn.net>
- Date: Thu, 28 Nov 1996 11:18:00
- After trying all sorts of fancy tricks to ease the (admittedly minor) task of plotting out the airfoil shape to cut out the tip of the horizontal stab (including an inconclusive bout with AutoCad), t
- /europa_forum//html/europa-list/1996-11/msg00141.html (7,306 bytes)
- 2. Re: tip shape for stabilators (score: 1)
- Author: Tony Krzyzewski <tonyk@kaon.co.nz>
- Date: Fri, 29 Nov 1996 09:33:17
- Once you have done the simple vertical cut, this may help you shape the tip itself... Draw a horizontal line along the centre of the piece. Draw a horizontal line between this centre line and the top
- /europa_forum//html/europa-list/1996-11/msg00142.html (8,303 bytes)
- 3. Re: tip shape for stabilators (score: 1)
- Author: Tony Krzyzewski <tonyk@kaon.co.nz>
- Date: Fri, 29 Nov 1996 11:01:23
- Ooops - hit send too early!! the draw another line to divide the distance between this line and the edge into two (LINE B). Grab a saw and, at 45 degrees, cut away the edge section using LINE A and L
- /europa_forum//html/europa-list/1996-11/msg00143.html (9,992 bytes)
- 4. Re: tip shape for stabilators (score: 1)
- Author: Peter Davis <101621.3070@compuserve.com>
- Date: Thu, 28 Nov 1996 16:56:52
- This sounds too complicated for me! When I was doing mine I went though all sorts of menal contortions about the tip shape, but ended up with the realization that 'if it feel right, it is right'! Rel
- /europa_forum//html/europa-list/1996-11/msg00144.html (7,289 bytes)
- 5. Re: tip shape for stabilators (score: 1)
- Author: Tony Krzyzewski <tonyk@kaon.co.nz>
- Date: Fri, 29 Nov 1996 12:26:41
- It only sounds complicated because it is difficult to explain! By creating the facet cuts you end up with a perfact tip shape. I did the estimation method on my rudder tip and I am still not happy wi
- /europa_forum//html/europa-list/1996-11/msg00146.html (8,452 bytes)
This search system is powered by
Namazu