- 1. Europa-List: Pitot Static (score: 1)
- Author: h&jeuropa <butcher43@att.net>
- Date: Sun, 18 Sep 2011 08:12:41
- We are planning to install a heated pitot static. The mast is 2 inches tall compared to the Europa supplied pitot which is 4.5 inches. Will mounting the pitot closer to the wing present any problems?
- /europa_forum//html/europa-list/2011-09/msg00100.html (7,118 bytes)
- 2. Re: Europa-List: Pitot Static (score: 1)
- Author: Bud Yerly <budyerly@msn.com>
- Date: Tue, 20 Sep 2011 00:10:58
- Jim, Were you having trouble with the single pitot head on your wings readings? Seemed OK when we flew, why not just follow suit. We use the Gretz mount here and that puts the heated Angus type tube
- /europa_forum//html/europa-list/2011-09/msg00104.html (9,150 bytes)
- 3. Europa-List: Pitot static (score: 1)
- Author: Richard Iddon <riddon@sent.com>
- Date: Tue, 17 Jun 2014 08:01:44
- I had an interesting experience yesterday when attempting a permit test flight. Had my plane at home for a 50 hour check and its annual inspection. Trailered it down to the field for test flight but
- /europa_forum//html/europa-list/2014-06/msg00145.html (8,024 bytes)
- 4. Re: Europa-List: Pitot static (score: 1)
- Author: Pete Lawless <pete@lawless.info>
- Date: Tue, 17 Jun 2014 08:28:24
- Hi Richard Been there done exactly the same thing! Drill out the remains of the plastic plug. Drill a small hole right through the metal about half an inch back from the end of the static pipe and pl
- /europa_forum//html/europa-list/2014-06/msg00146.html (8,534 bytes)
- 5. Re: Europa-List: Pitot static (score: 1)
- Author: Richard Iddon <riddon@sent.com>
- Date: Tue, 17 Jun 2014 16:12:56
- That sounds like a good solution. Thanks Pete. Richard Iddon plug. Drill a small hole right through the metal about half an inch back from the end of the static pipe and plug the end. Works a treat,
- /europa_forum//html/europa-list/2014-06/msg00152.html (7,390 bytes)
This search system is powered by
Namazu