europa-list
[Top] [All Lists]

Europa-List: Re: Which primer ?

Subject: Europa-List: Re: Which primer ?
From: Area-51 <goldsteinindustrial@gmail.com>
Date: Wed, 11 May 2022 21:45:11

16L of highcoat spray primer sealer
8L of heavy body filler
4L of lite body filler
400x400x6 nylon mixing pallet
8L of top coat + thinner reducer
4L of clear coat + thinner reducer (if using)
4L of cheap cleaning thinner
4L of prepsol wax remover
Set of Durablocs
Set of splines or 1m, 750mm, 400mm steel rulers
x40 80grit sanding discs
x40 120grit sanding discs
x40 400grit sanding discs
5m of 80grit sanding strip
10m of 120grit sanding strip
10m of 400grit sanding strip
x4 packets of tack cloth
bag of lint free pure cotton wiping cloth
x8 1L paint mixing jugs (disposable)
x1 paint measuring stick
x1 thermometer and humidity meter
x1 note pad, pen, calculator
x30 pouring filters (disposable)
x5 paint pot strainers 
x3 EN dust musk refills
x2 stand mounted fluorescent work lights
Pack if cheap tooth brushes, bottle brushes, pipe cleaners to clean sprays guns
Pack of cheap disposable plastic plastic ground sheets
x10 rolls of green painters masking tape

That is about what it takes to quality paint an entire family size sedan body 
shell
of about 200ft2 surface area

Manufacturers state nominal surface area coverage for their products; add 30% 
contingency.

PPG and Glasurit aerospace top coat is the same as automotive with boosted UV 
content
ratio and high gloss agent added. PPG and Glasurit aerospace primer is
same as automotive with additional chromium lead and other toxic corrosion 
inhibitors
and electrolytic chemical etch bonding agents added. The aerospace coatings
cure much harder as well. You will not scrape Glasurit's green aerospace
etch primer off an aluminium surface..


Read this topic online here:

http://forums.matronics.com/viewtopic.php?p=506741#506741



<Prev in Thread] Current Thread [Next in Thread>