John,
A simple can, similar to the one in Bud's drawing will work. I used a
4oz. PVC glue can. One hole in the removable top, and one high on the
side. At every oil change, I remove the top and dump out the gunk. No
oil on the belly...
Jeff - Baby Blue
On 2/6/2013 7:56 PM, John Wigney wrote:
> Dear Europaphiles,
>
> I am doing some routine maintenance and note that as usual, I have quite
> a lot of oily marks on the belly of my plane from the oil tank breather
> hose from my 912S.
>
> I am curious if any of you have installed an oil breather/separator and
> if this has been successful, perhaps you may be able to make a
> recommendation.
>
> Cheers, John
>
> N262WF, mono XS, 912S
> Mooresville, North Carolina
>
>
> *
>
>
> *
>
|