Hello Gerry,
Thanks for your reply. Yes, I would like a copy of the template! Thank you.
Best regards,
Simon Miles.
----- Original Message -----
From: "Gerry Holland" <gnholland@onetel.com>
Subject: Re: Europa-List: Carburettor heat shields
>
> Simon Hi!
>
>> I'm installing a Rotax 912S in my Europa. The Rotax installation manual
>> suggests that a heat shield should be installed beneath each carburettor
>> but
>> the Europa manual doesn't mention anything about them. Did anyone install
>> them and what did you use?
>
> I did using some fairly light gauge Aluminium. Paddy Clarke (Scholar and
> Gentleman!) lent me a Cardboard Template as pattern including bending
> lines.
> If you would like a scanned paper copy let me know.
>
> Regards
>
> Gerry
> Europa 384 G-FIZY
> Trigear with Rotax 912 and Arplast CS Prop.
> Dynon EFIS, KMD 150, Icom A-200 and SL70 Transponder.
> PSS AoA Fitted.
>
> http://www.g-fizy.com
> Mobile: +44 7808 402404
> WebFax: +44 870 7059985
> gnholland@onetel.com
>
>
>
|