Hi all,
The only comment I would make is that I had a lot of trouble with debris
getting under the seat of the seal and I could never stop the darn thing
dripping. I never use the drain valve any more, I just take the bowl off
the bottom empty it out and put it back.
regards, Paul
> Hi Brian,
> I didn't like the idea of a hatch for access to my Andair watsit, either.
> I
> therefore made a tube by wrapping four plys of bid around the tubing left
> over from the aileron push-rods. (The tube was well waxwd first, of
> course!)
> The GRP tube is exactly the right inside diam to take a standard fuel
> check/tester (the clear plastic sort).
> I bonded the tube directly under the Andair which is fitted with the usual
> T-shaped drain/test valve.
> All I have to do now is bend down, pop the tester up the tube and push to
> take a sample!
>
> Hope this helps,
> Regds,
> Ron Jones.
>
>
|