Thank you David and Tony.
I reversed the wires on the motor and feedback, and it works fine now.
Regards
Eamonn.
Eamonn, My manual ( Navaid installed 3 yrs ago) on P8 says 'If the aileron
deflection is backwards you must reverse the direction of servo rotation.
Swap the motor wires at the motor. Swap end connections at the Feedback
pot--these wires are white with red tracer and white with black tracer'. The
other option if installation geometry allows is to install the servo crank
arm 180deg round.
Regards David
----- Original Message -----
From: Eamonn Sheridan <esheridan1@YAHOO.COM>
Subject: Navaid working in reverse
>
> I have installed the Navaid AP1 and Servo unit as per the Europa Mod, but
the servo unit operates in reverse! When either the Trim or Turn pot is
moved to the left, the stick moves to the right. If the aircraft is tilted
to the left, the stick moves to the left. A bit worrying! There doesn't
appear to be any means of switching the mode in the servo unit or AP1. I
was going to try reversing the wires on the feedback potentiometer. Has
anyone found this problem with their installation? how did you overcome it?
>
> Eamonn
>
> G-ROOV
---------------------------------
|