Skymap 3IIIc pinout is:-
See page 3-1 of the Pilot Guide & Operations Manual
9 pin "D" connector
pin 1 Diferential data (RX Data)
pin 2 Data Out (TX data)
pin 3 reserved
Pin 4 Data in (RX data)
pin 5 Ground (0V or -ve)
Pin 6 reserved
Pin 7 Reserved
Pin 8 DC power input (10-33V +ve)
Pin 9 Annunciator or alarm
I hope this helps. Regards
Ian Rickard #505 G-IANI
Europa Club Assistant Mods Rep
e-mail mods@europaclub.org.uk
-----Original Message-----
From: owner-europa-list-server@matronics.com
[mailto:owner-europa-list-server@matronics.com]On Behalf Of
bizzarro@easynet.co.uk
Subject: Europa-List: SKYFORCE pinouts
Hi All
I would like to connect my skymap to my laptop (9pin serial) to use it to
drive
the Jeppessen Flite Map software I have just bought (which seems to be
excellent). Ultimately i would like to copy the installation in G-EMIN with
a
separate screen up front, driven from the laptop/mini computer in the back.
Does anyone know the pinouts for this cable including the power pins?
Cheers
Eddie
G-SELF
Sanding, sanding, sanding!
---------------------------------------------------
This mail sent through http://www.easynetdial.co.uk
|