Hi Hans, I couple of other e-mails also indicate that it is safe to pull on the tail-wheel axle so I think that is how I will go. You mentioned you have a hand crank - which has you at the 'working e
Hi folks, I finally uploaded my first video to You Tube. What better than a video of me flying my Europa! http://youtu.be/pGOgD-odT4E Regards Martin Tuck N152MT Wichita, Kansas
Hi Troy, Thanks for the compliments. Yes, I had one of the first 'builder' websites around 1997 time-frame and I'm glad it help inspire you to finish yours. Unfortunately a few years back Compuserve
Hi Carl, I had a similar thing on mine although I added a balsa Flettner strip (like the ones either side of the stab trim/anti-servo tab) but on one side of my rudder (rather than a tab sticking out
Hi Folks, I'm still thinking of putting in the Dynon D100 EFIS with pitch and roll autopilot for a project this winter. A couple of questions though from anyone who has already done this - or similar
I was interested to read the recent commentary regarding trying various covers to keep the Europa cockpit cool. I keep my Europa hangared but I suspect the cockpit temperatures are likely close to am
I like the look of the Drift HD camera. It has a small LCD screen which will allow you to compose your shot and a rotatable lens which allows you to straighten the picture even if mounted at an angle
I'm looking to replace all my rubber hoses this spring and I'm looking for a recommendation from those who have recently done this. The straight lengths of hose are easy I can get the sizes I need fr
Turn the Squelch knob to the left on the 403 MC. It is picking up the ambient noise so needs to be less sensitive. I had similar sounds and this cured it. Just turn it until the unwanted noise stops,
Hi Fred, How much are you asking for the eccentric OR10s? Martin I'll put you on the list and will advise cost and timing of a little production run. industrial infrastructure which supports Boeing..
Hi Clive, I did the 'LA' mod (although I don't have a LA myself I hasten to add) on my Europa Classic fuselage following the instructions provided by Europa using foam block carved to the desired sha
Hi Clive, Unfortunately y Europa was built before the proliferation of digital cameras and the photo I sent you was scanned from a print taken from a 35mm camera. You are right though, I had to think
Hi All, I'm looking to replace my oil hoses. The one from the pump to the radiator has a 90 deg bend in it. I had noted that it was suggested I contact Lockwood as they have a metal 90 deg adapter to
Thank you all who responded for taking the time to provide some very helpful information. Martin Tuck with AN fittings and very flexible steel braided hose from Pegasus Racing. Frans did the same but
Does anyone know if the MT04 mounts in the Europa Engine install manual are the same as the Lord //J 3608-1 mounts as specified in the Rotax installation manual? Regards, Martin Tuck
While I change out the engine mount rubbers I thought I would perform Mod 72. Does anyone in the US who might already have done the mod have a 16.5mm reamer I could borrow or buy from you? Regards, M