Hi Simon,
I wish they were. I recently put over 1000 miles on N214KS and the fuel
required
to fill the tank agreed to within .1/.2 gallons of what the gauge said I
used. Plugs look normal.
Ken
Simon Smith <jodel@nildram.co.uk> wrote:
I think you figures might be a little suspect. The Rotax 914 Operators
manual
give Take off performance as 5800rpm, 39.9 inHG and 8.7 us gph. Max continuous
as 5500rpm, 35.4 inHG and 7.2 us gph. (ref pages 8-2 & 10-1)
Are you sure that your fuel flowe sensor is correctly calibrated?
Are these airspeeds IAS or TAS?
Simon
-----Original Message-----
From: owner-europa-list-server@matronics.com
[mailto:owner-europa-list-server@matronics.com] On Behalf Of KENNETH D HILL
Sent: 05 June 2006 00:24
Subject: Re: Europa-List: [ Ken Hill ] : New Email List Photo Share Available!
Duncan,
I'm afraid this data will get rearranged but here it goes. This test was done
at 5500' at a max weight of 1450lbs. with very little deviation from standard
day temp. Airspeeds are within 1 kt. These airspeeds appear to stay constant
up to 12,500 (the highest I've observed)
1. 100kts, FF 3.8, RPM 4500, MF 25.
2. 116kts, FF 5.0, RPM 4800, MF 28
3. 129kts, FF 6.2, RPM 5000, MF 30
4. 134kts, FF 7.6, RPM 5250, MF 33
5. 140kts, FF 8.3, RPM 5500, MF 35
6 148kts, FF 10, RPM 5800, MF 40
I'd appreciate if others would post there data.
Ken
Duncan McFadyean <ami@mcfadyean.freeserve.co.uk> wrote:
<BLOCKQUOTE class=replbq
|