Hi Fred,
I would try this dremel attachment to regulate depth.
Rotary Multi Tool Cutting Guide with Drills Router Attachment Kit HSS Router
Drill
Bit Set https://amzn.eu/d/8s68s8r
Best wishes,
Roger
> On 6 Aug 2022, at 05:47, Kingsley Hurst <kingsnjan@westnet.com.au> wrote:
>
> CAUTION: This email originated from outside your organization. Exercise
> caution
when opening attachments or on clicking links from unknown senders.
>
>
> Fred,
>
> I would suggest a flap disc on an angle grinder. The coarseness of the flap
> disc
subject to test but Id try medium to start.
>
> Before I fitted my windows, I used this method to remove existing gelcoat in
order to get maximum depth rebate for the window. I approached the job thinking
it would take several hours but much to my surprise it was done in no time.
I found the flap disc easy to control.
>
> Good luck mate
>
> Kingsley
>
> Sent from my iPhone
>
>> On 6 Aug 2022, at 11:56 am, Fred Klein <freddythek10@gmail.com> wrote:
>>
>>
>> Gents,
>>
>> Among the tasks I face ahead is to replace my shattered starboard
>> door/window.
>>
>> Using a heat gun, I have successfully removed the shards with heat sufficient
to soften the acrylic and break its bond with the Redux but without making the
slightest impression in the Redux itselfit remains as a smooth film which is
bonded to the recess in the door/window frame.
>>
>> I would like to remove the existing Redux in order to have the full depth of
the frame recess available for a fresh bed of Redux when I install the new
window.
>>
>> Would anyone have a recommendation on the best way to remove the existing
>> Redux?
>>
>> thanks,
>>
>> Fred
>> A-194
>
>
Roger Sheridan
Line Pilot
+44 (0) 1737 822 885
www.specialist-aviation.com
Specialist Aviation Services Limited Registered in England and Wales No:1848773
Registered office: Gloucestershire Airport, Staverton, Cheltenham,
Gloucestershire
GL51 6SS
This message and any attachments are confidential and intended only for the use
of the person to whom they are addressed. If you are not the intended recipient,
you must not use, copy or distribute this message or any attachments. Any
such action may be unlawful. If you have received this message in error, please
notify us immediately by replying to the message and delete it from your
computer.
Messages sent to and from us may be monitored.
Internet communications may be intercepted, corrupted, lost, arrive late or
incomplete,
or contain viruses. Therefore, we do not accept responsibility for any
errors or omissions that have arisen as a result of email transmission or for
viruses. It is your responsibility to conduct your own virus checking. If
verification
is required, please request a hard-copy version. Any opinions expressed
are those of the author and do not necessarily represent those of the company.
--------------------------------------------------------------------------------
Scanned by SystemForce I.T. PRMX Security System
|