Everything now ripped out. What a job. So much for hdpe not sticking to
epoxy! The lay up delaminated rather than release the hdpe.
William Daniell
+1 786 878 0246
On Mon, Jul 18, 2022, 06:14 James <james@kingdom.ie> wrote:
> Duncan,
> It wasn't me who had a cracked tank. I'll have to search through the foru
m
> to find out who it was and get back to you.
>
> James
>
>
> Get Outlook for Android <https://aka.ms/AAb9ysg>
> ------------------------------
> *From:* owner-europa-list-server@matronics.com <
> owner-europa-list-server@matronics.com> on behalf of D McFadyean <
> ami-mcfadyean@talktalk.net>
> *Sent:* Monday, July 18, 2022 10:16:45 AM
> *To:* europa-list@matronics.com <europa-list@matronics.com>
> *Subject:* Re: Europa-List: The culprit
>
>
> James,
>
> What did you use to "weld" the tank?
>
>
> Duncan McF.
>
> On 17 July 2022 at 14:56 James <james@kingdom.ie> wrote:
>
> Will, Xmas before last I had a leak which turned out to be a fuel hose
> that had been sawn through by the rudder cable. During the course of aski
ng
> for help here on the forum & before I found the cause, someone said that
> their tank developed a crack & he cut an access opening on the top big
> enough to get 2 hands in, to weld the crack.
>
> Would this solution be easier for you, rather than removing the complete
> tank?
>
> Cheers
> James
>
> Get Outlook for Android <https://aka.ms/AAb9ysg>
> ------------------------------
> *From:* owner-europa-list-server@matronics.com <
> owner-europa-list-server@matronics.com> on behalf of William Daniell <
> wdaniell.longport@gmail.com>
> *Sent:* Sunday, July 17, 2022 1:35:28 PM
> *To:* europa-list@matronics.com <europa-list@matronics.com>
> *Subject:* Re: Europa-List: The culprit
>
> Top "shelf" horizontal part....just to the right ot the reinforcement
> which was stuck pretty hard.
>
> In other words exactly where youd expect stress.
>
> The tank material is in pretty good shape. However when i put in the
> tank many years ago i followed the manual. It is glued in very
> well.....very well :-(
>
> William Daniell
> +1 786 878 0246
>
> On Sat, Jul 16, 2022, 23:48 Fred Klein <freddythek10@gmail.com> wrote:
>
>
> WillCan you describe the location of the crack in the tank?
F.
>
>
> > On Jul 16, 2022, at 3:32 PM, William Daniell <
> wdaniell.longport@gmail.com> wrote:
> >
> >
> >
> > William Daniell
> > +1 786 878 0246
> > <PXL_20220716_164328200.jpg>
>
>
> ==========
> pa-List" rel="noreferrer noreferrer" target="_blank">
> http://www.matronics.com/Navigator?Europa-List
> ==========
> FORUMS -
> eferrer noreferrer" target="_blank">http://forums.matronics.com
> ==========
> WIKI -
> errer noreferrer" target="_blank">http://wiki.matronics.com
> ==========
> b Site -
> -Matt Dralle, List Admin.
> ="noreferrer noreferrer" target="_blank">
> https://matronics.com/contribution
> ==========
>
>
|