europa-list
[Top] [All Lists]

RE: Europa-List: Rotax 912ULS Low Fuel Pressure

Subject: RE: Europa-List: Rotax 912ULS Low Fuel Pressure
From: Steve Ivell <SteveIvell@pestproof.co.uk>
Date: Thu, 22 Apr 2021 08:25:07

Apparently it's a known "phenomenon" .

Kind Regards

Steve Ivell

-----Original Message-----
From: owner-europa-list-server@matronics.com 
<owner-europa-list-server@matronics.com>
On Behalf Of Ian Cook
Sent: 22 April 2021 08:08
Subject: RE: Europa-List: Rotax 912ULS Low Fuel Pressure


Check your fuel filters for contamination.

Ian


-----Original Message-----
From: owner-europa-list-server@matronics.com 
<owner-europa-list-server@matronics.com>
On Behalf Of Pete
Sent: 21 April 2021 23:58
Subject: Re: Europa-List: Rotax 912ULS Low Fuel Pressure


What I notice is that when the electric pump is shut off, the pressure does drop
to near zero, but recovers within about 5 seconds back to the normal 5-7psi.

>From my research, this type of intermittent drop is acceptable when the series
boost pump is turned off.

Cheers,
Pete

> On Apr 21, 2021, at 6:55 PM, arwel pritchard <arwel.pritchard@powercom.ltd.uk>
wrote:
> 
> <arwel.pritchard@powercom.ltd.uk>
> 
> Good Evening
> 
> I noticed something strange this evening asI was climbing out at full power,
when I got to about 1000ft, I switched the electric fuel pump off and the fuel
pressure dropped quite alarmingly from about 0.32bar to below 0.2bar. When I
noticed it, I immediately switched the electric pump back on to restore the 
pressure.
I then leveled off, reduced power and flew a tight circuit back to land.
> 
> After landing, I monitored the pressure at various power levels (with 
> mechanical
pump only) and saw the pressure was at around 0.3bar continuously.
> 
> I have seen it posted on various forums that its 'one of those things' and its
nothing to worry about, but I do!!
> 
> I should also mention that Im seeing the pressure on a mechanical gauge as 
> opposed
to an electrical display readout.
> 
> Has anybody else come accross this before and is it a real problem?
> 
> 
> Thanks
> 
> Arwel
> 
> G-BYPM
> 
> 
> 
> 



<Prev in Thread] Current Thread [Next in Thread>