Sorry to hear that Karl.
I will connect mine to a Dynon Skyview EMS, so hope it will display all
temps!
Although the picture of the Skydrive shows the range as 50-150 =B0C, so
maybe
you have a faulty gauge?
Rgds,
Paul Mansfield
-----Original Message-----
From: owner-europa-list-server@matronics.com
[mailto:owner-europa-list-server@matronics.com] On Behalf Of Karl Heindl
Sent: 17 May 2016 13:44
Subject: Re: Europa-List: Re: coolant choce and temperature monitoring
questions
my Skydrive temp display only goes to 50 degrees max, do it is pretty
useless except as an indicator for on/off.
________________________________________
From: owner-europa-list-server@matronics.com
<owner-europa-list-server@matronics.com> on behalf of Europaul383
<europaul383@hotmail.com>
Sent: 16 May 2016 22:15:18
Subject: Europa-List: Re: coolant choce and temperature monitoring
questions
--> <europaul383@hotmail.com>
I used the Skydrive coolant temp kit, repositioning one of the 2 fitted
CHT
senders for use in the M10 threaded tube. The CHT sockets on my 912S
are
blind, so I could remove one without creating a leak - check yours, or
just
buy an additional sender for use in the coolant kit!
I have the carb heat kit, so needed the Adapter 3 (sort of double T
piece -
see picture) to take off both the carb heat and the temp probe.
http://www.skydrive.co.uk/products.asp?cat=67
It makes sense when you see the parts. Holler if it's not clear,
although
Mark (Mick?) at Skydrive is v helpful and will talk you through the
options.
HTH
Paul M 383
XS Mono 912S
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=456307#456307
Attachments:
http://forums.matronics.com//files/adapter_3__new_large_197.jpg
List
7-Day
|
