Europa-List: Re: Fuel flow transducer 914

Subject:	Europa-List: Re: Fuel flow transducer 914
From:	pestar <peter@reivernet.com>
Date:	Tue, 26 Jan 2016 13:12:18


You need two units which I have in my DynAero MCR-4S and depending on your 
instrumentation
ie EFIS or other, your device will need to subtract one from the other
to give you fuel flow.

I use a MGL EFIS with only one input with the trickery being done by a little 
device
---From sparxfly.co.nz (it takes the 2 inputs, subtracts and then outputs to
the EFIS).

Cheers Peter

--------
Peter Armstrong
Auckland, New Zealand
DynAero MCR-4S (Do not shoot me :) ).


Read this topic online here:

http://forums.matronics.com/viewtopic.php?p=452314#452314

<Prev in Thread]	Current Thread	[Next in Thread>
Europa-List: Re: Fuel flow transducer 914, pestar <= RE: Europa-List: Re: Fuel flow transducer 914, Stanislav Švec

Previous by Date:	Re: Europa-List: Filling on top of gel coat., William Daniell
Next by Date:	Re: Europa-List: Fuel flow transducer 914, Robert Borger
Previous by Thread:	Re: Europa-List: Filling on top of gel coat., Fred Klein
Next by Thread:	RE: Europa-List: Re: Fuel flow transducer 914, Stanislav Švec
Indexes:	[Date] [Thread] [Top] [All Lists]