I hope to be there from California. WD blades are very nice looking and ligh
ter/faster is what it's all about!
Kevin
> On Feb 1, 2015, at 8:09 PM, Bud Yerly <budyerly@msn.com> wrote:
>
> Hello all,
> If you are fed up with the effects of =9CClimate Change=9D and
need a break from the winter doldrums, come on down to Florida this April 2
0-26 (Monday through Sunday).
>
> I have reserved spot N-55 on the main flight line off Hangar B. I have no
idea what plane I am showing this year as I have a few to choose from. Thi
s year I should have a new blade for the AP332 made by Whirlwind propellers f
or us. I hope to have it installed and tested and provide numbers for you a
ll. The Warp Drive (WD) blades are pretty good, but in testing I have found
the Sensenich and Whirlwind two blade a bit faster by 4-8 knots at altitude
at max continuous. Jim at Whirlwind (WW) is confident his new three blade w
ill be lighter for sure and at least perform a bit better. This is an inexp
ensive change for the 332 owners. I hope to have the tooling to swap over f
rom the WD to WW blades. I also have some additional data on landing light p
erformance for those of us who are amp zealots.
>
> I=99ve toyed with some trim systems with Creighton Smith who hopes t
o be flying in a couple months in 96EG.
>
> So come on down and have some fun and camaraderie.
>
> Best Regards,
> Bud Yerly
> Custom Flight Creations, Inc.
>
>
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3
D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3
D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3
D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3
D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
>
|