Gidday,
I have just extended the coaming over my sub panel, a similar distance
that the original one extended over the primary, and then I extended the
primary to match. So, I have a coaming made out of a bunch of foam
layers, all shaped up and ready to deal with. I=92d like to ask before I
glass it over, whether there is any opinion of how far extended the
coaming should be over the primary panel? Mine now is 4 1/2=94 or 110
mm, and it appears that it will work well. Still, others may disagree,
so this is the time to ask.
Thanks, in hope and anticipation.
Regards
Tony Renshaw
P.S. It is going to be trimmed up a little more, but the 5 minute epoxy
is challenging my sanding skills. I might use polyester car bog, my
favourite contouring product ontop of the foam, and then sand it perfect
before 2 plies of BID. Don=92t worry, my BID will lock it in ontop of
the coaming and down onto the top of the primary and sub panels.
|