OOPS...misread the manual...the "two small holes" are in the lugs, not in the FL
16s...in truth, I don't recall my FL 16s having ANY holes...
On Jul 10, 2013, at 1:26 PM, Fred Klein wrote:
>
> Ron...reading on p.9 of chap. 28M:
>
>> Step 14
>> Attach the hinge arms FL16 to the brackets FL18 then swing them up to engage
between the two pairs of lugs that are welded to the cross-tube, rotating the
tube so that the lugs and the hinge arms are in line. Clamp the lugs and hinge
arms together then, using the two small diameter holes in each lug as a centre,
drill right through with a 4.8 mm drill. Insert an AN3-5A bolt in each hole
and reposition the clamp if necessary before drilling the second hole then,
placing on an AN960-10L washer, tighten each bolt up with an MS21042-3 nut and
remove the clamps. The flaps will now extend and retract together and only
require
linking to the landing gear retraction mechanism.
>
> Manual indicates you should have 2 small holes...not 1...what size is your
> hole?
>
> I don't recall if my FL 16s had one or two holes...
>
> F.
>
> On Jul 10, 2013, at 11:51 AM, rparigoris wrote:
>
>>
>> Hi Group
>>
>> Anyone have any idea why both of my FL-16 Flap Hinge Arms have a hole on the
square end?:
>> https://skydrive.live.com/redir?resid=550FC20DBDDB521D!1655&authkey=!AF7B8FVUzjNaSt8
>>
>> Thx.
>> Ron Parigoris
>>
>>
>>
>>
>> Read this topic online here:
>>
>> http://forums.matronics.com/viewtopic.php?p=404403#404403
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>> --
>
>
>
>
>
>
>
>
> --
> BEGIN-ANTISPAM-VOTING-LINKS
> ------------------------------------------------------
>
> Teach CanIt if this mail (ID 04JWIxqCg) is spam:
> Spam:
> https://antispam.roaringpenguin.com/canit/b.php?i=04JWIxqCg&m=b801e1d25aea&t
130710&c=s
> Not spam:
> https://antispam.roaringpenguin.com/canit/b.php?i=04JWIxqCg&m=b801e1d25aea&t
130710&c=n
> Forget vote:
> https://antispam.roaringpenguin.com/canit/b.php?i=04JWIxqCg&m=b801e1d25aea&t
130710&c=f
> ------------------------------------------------------
> END-ANTISPAM-VOTING-LINKS
|