Europa-List: Re: 912S Rough Running at High Revs

[tennant <barrington.tennant@gmail.com>]

Bryan,

Check your fuel system for air ingress.

I had similar symptoms many years ago. Impossible to find, until I fitted a 
clear
plastic pipe to one of the carb feed tubes. I found that although there was
no obvious leak lots of air was getting into the fual supply, enough that the
engine ran weak at high load. New hoses and decent clips solved it.

Barry Tennant

--------
Barry Tennant
D-EHBT
At EDLM  -  Germany


Read this topic online here:

http://forums.matronics.com/viewtopic.php?p=355262#355262