Rob
Thanks for the drawing. The Dynon servo (as are a number of others) is
mechanically identical to the TruTrak but has it's own electrical interface.
The revised mods makes only minor changes/corrections but do authorise the
use of the Dynon in the UK.
As noted in the Mod, Dynon do not provide a bracket. You can use the
TruTrak bracket or make you own.
Revised mod 75 attached. If you want 76 let me know.
Ian Rickard G-IANI XS Trigear, 300hours
Europa Club Mods Specialist
e-mail g-iani@ntlworld.com
From: owner-europa-list-server@matronics.com
[mailto:owner-europa-list-server@matronics.com] On Behalf Of Rob Housman
Sent: 29 August 2011 15:55
Subject: WAS Europa-List: Mod 71 - Nose gear leg bungee, replacement with
springs NOW Dynon Autopilot
Thanks again Ian.
I am about to install the Dynon servos but lacking your update to the Mod, I
compared the Dynon SV32 to the TruTrak B servo and having concluded that
they are almost identical I came up with the attached mounting scheme. I
would appreciate your comments and a copy of the Mod 75 and Mod 76
revisions. I designed and fabricated all of the mounting hardware to suit
the Dynon servo since the factory did not offer a Mod - if you'd like I will
send you the detailed drawings.
Best regards,
Rob Housman
Irvine, California
Europa XS
Rotax 914
S/N A070
Airframe complete
Avionics soon
|