Evening John
Mine is in the line just before it splits to the carbs and after the take
off for the return.
Pete
-----Original Message-----
From: owner-europa-list-server@matronics.com
[mailto:owner-europa-list-server@matronics.com] On Behalf Of John Greenhalgh
Sent: 30 July 2011 22:28
Subject: Europa-List: Fuel Pressure Sender
<john.greenhalgh1@sky.com>
Hi,
Any advice on the correct location for a fuel pressure sender. Mine
is fitted to the 'return to tank' tubing and I can't get my EIS to
register (fitted by previous builder). I would have thought the fuel
pressure sender should be in the feed to engine but I'm no expert. If
this is so would it be before or after the mechanical fuel pump?
I would appreciate any advice on a suitable location of such a device.
Best Regards John.
--
This message has been scanned for viruses and
dangerous content by Houxou, and is
believed to be clean.
|