On 05/31/2011 03:21 PM, Carl Pattinson wrote:
> It's pretty likely that a 2 bladed prop would be unacceptable to the LAA due
> to the increased diameter. The standard 3 blade prop is just on the limits
> of what they will accept for a mono-wheel (especially the original Classic
> engine installation). The newer engine mounting/ cowlings have the engine
> about 2" higher off the ground than the original design.
And I have to add that with my tri-gear installation, I have extended
the nose gear with 5cm (2 inches) for higher ground clearance as my
"home" field is a bumpy grass strip. But this is for my 1750mm prop.
Frans
|