check the wires from the iginition unit out. You will have to feel each wir
e, -as the wire will break inside the insulation... Both times I have had
this problem the broken wire was very close to the ignition module...
-
Jim Brown
--- On Mon, 5/23/11, Guerner Remi <air.guerner@orange.fr> wrote:
From: Guerner Remi <air.guerner@orange.fr>
Subject: Europa-List: urgent: 912S ignition failure
Date: Monday, May 23, 2011, 7:22 PM
Hello,
I have an intermittent ignition failure on both channels A and B. After man
y hours of investigation I am now suspecting the wiring to and from the ign
ition modules. My question is to those who have experienced ignition failur
e caused by broken wires in the ignition system. Which wire was broken and
where?
Regards
Remi Guerner
le, List Admin.
|