Have you changed the plugs, this is an indication of a plug breakdown at
higher temp/pressure.
Regards,
From: owner-europa-list-server@matronics.com
[mailto:owner-europa-list-server@matronics.com] On Behalf Of
peter.rees01@tiscali.co.uk
Sent: 25 October 2010 16:39
Subject: Re: Europa-List: Ignition Module
<peter.rees01@tiscali.co.uk>
Thanks for the response.
The problem diesn't result in a 'dead cut' when selecting the rogue
unit - just a drop of about 200 RPM (as opposed to about 75 on the good
unit). The fault also only seems to happen when the engine is up to
temperature (which makes ground testing significantly more difficult).
Both of these lead me to believe that the problem is inside the box
(though I suppose that it is possible that as the engine comes up to
temperature, the insulation on the wires softens and the resulting
increaded allows a damaged wire to move more than when cold).
----Original Message----
From: nigel_graham@m-tecque.co.uk
Date: 25/10/2010 7:31
Subj: Re: Europa-List: Ignition Module
co.uk>
Peter,
This is a well known problem with the older 4 way plug versions.
Before
you shell out for a new ignition unit, take a good look at the flying
leads from the "black box" to the connector.
The prolonged vibration tends to work harden the copper leads and
they
eventually fracture within their plastic sheathing (hidden from
view),
making intermittent contact.
I won't pretend that its easy to spot, but it's a lot cheaper than a
new
unit!
Nigel
On 24/10/2010 22:38, Peter Rees wrote:
> <peter.rees01@tiscali.co.uk>
>
> By a process of substitution, it would appear that one of the 2
> ignition modules on our 912 powered Europa has developed an
> intermitant fault.
>
> The price for these in the UK is a shade under =C2=A3700!! Does anyone
know
> a way of getting hold of one at a more attractive price than that?
> (looking for the version with the 4 way plug).
>
> Thanks
>
> Peter (G-MFHI)
>
>
>
>
_-
=========
_____
No virus found in this message.
Checked by AVG - www.avg.com
|