Thanks - I'll take a look - trouble is, its a cow to get to as its on top of
the GPS in the radio stack - panel out and back is a good 2-3hrs :-(
----- Original Message -----
From: "Raimo Toivio" <raimo.toivio@rwm.fi>
Sent: Saturday, February 28, 2009 7:47 PM
Subject: Re: Europa-List: Altitude encoder adjustment
>
> Have you opened the AK-350 box?
> I had similar problem and there was a simple leak because of a stupid
> connection of an air tube inside the box.
> I fixed it and thats it.
>
> Raimo OH-XRT
> ----- Original Message -----
> From: "Peter Rees" <peter.rees01@tiscali.co.uk>
> To: <europa-list@matronics.com>
> Sent: Friday, February 27, 2009 11:46 PM
> Subject: Europa-List: Altitude encoder adjustment
>
>
>> <peter.rees01@tiscali.co.uk>
>>
>> Anyone in the UK had their altitude encoder repaired / adjusted? If so,
>> was
>> it relativly cheap or are the units not economically repairable? We have
>> an
>> Ameriking AK-350 that is being reported as over reading by about 500ft.
>>
>> One alternative would be to ditch it and fit the serial to grey code
>> converted to the Dynon as I saw something on the interweb suggesting that
>> Ameriking were no longer in business.
>>
>> Peter
>>
>>
>>
>>
>>
>>
>>
>
>
>
|