This shrink-wrap may be of some value for reducing comm noise...came
across it in McMaster catalogue
> A layer of cloth shielding protects your unshielded wire or cable
> from EMI/RFI. Use on shielded wire or cable for added protection or
> for coverage at the terminal where an existing shield has been
> stripped back for the connector. Tubing is black polyolefin. Note:
> For proper grounding, a conductive wire (see pages 782-784) or braid
> strip (see page 910) should be wound around the outside of wires or
> attached by solder or conductive epoxy (see page 3340)
http://www.mcmaster.com/#catalog/115/797/=sesag
Fred
A194
--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
|