I have (rather foolishly it seems) bonded the CS10C caps into the
ends of the CS10 pitch torque tube without measuring the depth of the
CS10C flanges. Now that I come to add the rivets, nowhere on the
diagrams or text can I find reference to how far fom the end of CS10
the rivet holes should be drilled. I have a mental picture of the
CS10C flange, but I don't feel comfortable drilling holes based on
that! There's not a lot of leeway between (a) having the hole too
close to the front face of CS10C so the rivet will be obstructed by
it and won't set properly and (b) having it too far away and breaking
out of the edge of the flange.
Anyone got a CS01C not yet inserted that they can measure and let me
have the depth of the flange, please?
regards
Rowland
--
| Rowland Carson LAA #16532 http://home.clara.net/rowil/aviation/
| 1100 hours building Europa #435 G-ROWI e-mail <rowil@clara.net>
|