Nigel.
I've replaced two shields. The latest I manufactured out of stainless.
We'll see if it holds up better...
Jeff - Baby Blue
nigel charles wrote:
> Having recently done my annual permit servicing I noticed that a clamp
> had come detached from one of the straps which hold on the heat shield
> for the silencer. On closer investigation I found that two of the four
> corners of the heat shield had cracks and one had lost a corner of the
> shield entirely. This exhaust system had only been fitted for one year
> and a total of 55 hours running. I replaced the heat shield. Both the
> old and new shields had sharp corners and sharp edges. I have rounded
> these to reduce the risk of future cracking. The exhaust manufacturer
> has been notified suggesting this is done on future exhausts before
> dispatch. Other XS owners with 912's may wish to check their heat shields.
>
>
>
> Nigel Charles
>
>
>
>
>
>
>------------------------------------------------------------------------
>
>
>
|