Hi Ferg
Assuming that Europa give you the Andair CK321-H check valve, The
measurements are 72.80mm overall including nipples, Body only is 41.40mm,
the nipples are 8.20mm O/D, Diameter for the main body are 27.40mm
Ivor Phillips
----- Original Message -----
From: "Fergus Kyle" <VE3LVO@rac.ca>
Sent: Sunday, February 19, 2006 3:33 PM
Subject: Europa-List: Check valve dimensions
>
> Cheers,
> I am planning the "fuel pump board" for the rear baggage area
> and it will be about 13-1/2"x9-1/2" and vertical. When I received my FWF
> kit, it appeasr the company was in its agony throes and I didn't notice
> some
> lacking parts, among which were the NRV (check valves) which are spec'd in
> parallel with now-series pumps. Roger is very kindly sending these, but in
> the interim, I want to plan the layout.
> If your magic carpet is nearby, and you think of it, I would
> very much appreciate a measurement of the overall length of your
> Europa-issue check valves and/or the approximate length of the 'body' OAL
> minus nipples. I presume the nipples to be 3/4" or 19mm each for 8mm
|