> Richard,
> I believe it is the coil current that is generating the
> heat, not the load. Think it must be faulty. Any idea
> where I can get one of these master switch operated
> solenoids with the 0.1 amp coil load.
> Paul
Paul
If you want a relay to operate the battery connection to
the starter you will need a big relay, and a manually
operated "big red switch" from a rally car is better.
For a relay to be operateded by your master switch
(without taking the starter load) RS have them.
308-0611 at 2.50
for SPNO (Normally open) and a switching current max of 40
amps.
Coil power 1.6 watts = 0.13 amps.
Page 1-1553 in their latest catalogue or at a store near you !
HTH
Richard
|