Richard,
If all connections are tight, you might try replacing the sending unit.
If that fails, the gauge is probably toast...
Jeff - N55XS
57 hours and still smilling...
Richard Iddon wrote:
>
>My VDO analogue water temp gauge on my 912S has been acting up on the
>last few flights. Immediately on startup it flickers wildly then as the
>engine warms up it settles down but to a higher temp. than it was
>running previously. I have checked the connections and wiring to the
>sender and all seems OK. I am wondering if :-
>a) anyone experienced anything similar & if so, what was the cause
>/ outcome.
>b) anyone who has fitted a digital system has got a VDO gauge they
>would be prepared to sell.
>
>Richard Iddon G-RIXS
>
>
>
>
|