Hi all
Can anybody give me any idea why idea why when I transmit on my Microair 760
the digital trim indicator goes full nose down.
The actual trim does not move and as soon as I release the transmit button
the indicator returns to normal.
The trim is hotwired direct to the battery and the radio comes from the bus
which is powered up through the master switch.
The radio aerial does run with the trim wiring down to the rear and the
aerial is a Bob Archer inside the fin.
No interference noise is experienced
Not a major=85..but irritating
Thanks=85=85Gavin Lee=85=85#355
--
|