The Engine Manual supplied with my engine kit (912S) is Issue 1 and describes
fabrication of the oil tank mounting bracket from the steel sheet.
A later Engine Manual (Issue 2, from the Club website) adds to the bracket an
additional angled bracket to bridge the cutaway in the firewall under part of
the mountinmg bracket itself.
Unfortunately, although the later issue refers the reader to the 'drawing at the
end of this chapter' for templates, the drawing is missing from the downloaded
copy.
Can anyone tell me the dimensions called out in the drawing and the material
type and thickness supplied in later engine kits for this additional angled
bracket ?
John Cliff
#0259
|