In a message dated 11/04/04 02:29:58 GMT Standard Time, EuropaXSA276@aol.com
writes:
> After a few choice words with myself I decided that the foam cut out area
> may
> be incorrectly installed at the factory. Also in a conversation with SteveD
> today we agreed that perhaps cutting away some of the foam to allow the
> closeout box to be properly installed would be OK. I also sent a letter to
> Neville
> for his opinion. It appears as if I'll need to cut away about an inch of
> foam.
> Can you remember how much you removed?
>
Brian
I had to cut away about half an inch of foam.
John Heykoop
|