I think its 1.25" diameter. Which is fine if you live in the States where
imperial size stuff can still be obtained. In the UK its 32mm, which doesn't
fit!
Duncan McF.
----- Original Message -----
From: "James Nelson" <europajim@juno.com>
Subject: Re: Europa-List: Outriggers
>
> Paul,
> I had to make two new units. I went to my local plastics
> supplier and got 3' of nylon 66 in 1" dia. and refigured the length I
> needed. Replaced the factory units and all is well.
>
> Jim Nelson
>
> <paul.mcallister@qia.net> writes:
> > <paul.mcallister@qia.net>
> >
> > Hi all,
> >
> > I fitted my out riggers today and I found that the wheels are 30mm
> > off the ground. I suspect that I could sneak a bit on both ends,
> > but not a lot. I'd be interested in knowing what are the typical
> > distances that people are using.
> >
> > Paul
> >
> >
> >
> > >
> > >
> > >
> > >
> >
> >
> >
> >
> >
>
>
|