Hans-Peter,
My typical cruise setting is 32" MP, and 4900-5000 RPM. The higher RPM (eg:
5300) doesn't seem to improve my cruise speed much but does add to the noise
level.
Garry Stout
----- Original Message -----
From: "Jim Brown" <acrojim@cfl.rr.com>
Subject: Re: Europa-List: Cruise power setting
>
> Hans-Peter
>
> I run my same setup in cruise at 5300 RPM and 33" MP
>
> Jim Brown
> 500+ hrs. flying N398JB
>
>
> Hans - Peter Reusser wrote:
>
<hpreusser@tiscalinet.ch>
> >
> > Hello
> >
> > I am doing some prelimenary planning of the elektrical system and am
> > interested in the typical cruise power RPM setting for the Rotax 914
engine
> > with an airmaster CS prop.
> > I need this to evaluate the power output of an alternator mounted to the
> > vacum pump drive of the engine.
> >
> > Thank you for your help.
> >
> > Hans-Peter #498 XS
> > On closing the wings.
> >
> > *****************************************************************
> >
> > Hans-Peter und Christa Reusser Tel: +41 (33) 654 00 24
> > Spiezbergstr. 13 Fax: +41 (33) 654 30 21
> > 3700 Spiez E-mail: hpreusser@tiscalinet.ch
> >
> > *****************************************************************
> >
>
>
|