Me too Jim....
Troy Maynor
N120EU Monowheel Classic
Left to finish:
Paint,interior,engine install, wiring.
> -----Original Message-----
> From: owner-europa-list-server@matronics.com
> [mailto:owner-europa-list-server@matronics.com]On Behalf Of
> DJA727@aol.com
> Sent: Wednesday, December 17, 2003 4:20 PM
> To: europa-list@matronics.com
> Subject: Re: Europa-List: Operation Kitty Hawk
>
>
> In a message dated 12/17/2003 12:44:10 PM Pacific Standard Time,
> europajim@juno.com writes:
>
> > Dave,
> > I installed a cowl flap that seems to have reasonable effect. I
> > mounted it in the outlet of the cowl and it goes from (on the ground)
> > about 45 degrees downward, to almost fully closed. (about 1-1/4" gap to
> > fully closed. It functions with a push pull knob on the
> instrument panel
> > under the radio stack. Pix are available if you want something
> to ponder
> > over.
> >
> > Jim Nelson
> > N15JN
> >
>
> Thank you Jim,
>
> I would love to see those pictures as that is exactly what I am
> planning. The
> big question I have is how to route and anchor the control cable. If you
> could send me pictures off line, I'd appreciate it.
>
> thanks,
>
> Dave
> A227
> Mini U2
>
>
|