Europa-List: thru the firewall

[Graham Singleton <graham@gflight.f9.co.uk>]

--=======26153F76=======

>I cut a rectangular hole in the firewall large enough to
>easily fit the connector through.  The aluminum was cut in a rectangle to
>overlap the hole by a goodly amount

Better still, use the piece of phenolic you cut from the front of the 
tunnel. Also, make it big enough to do the wiring connections to the panel, 
or even take out the odd instrument, after the panel is in place. A lot of 
people have done this
Graham 

--=======26153F76=======


---

--=======26153F76=======--