Europa-List: Re: Europa-List Digest: 27 Msgs - 04/29/03

[Paul Atkinson <paul@theatkinsons.demon.co.uk>]

On Wednesday, April 30, 2003, at 07:56 , Europa-List Digest Server wrote:

>> I guess that what was happening was that the
>> skin over the foam was flexing in a downward direction whilst being 
>> sanded and
>> the spar wasnt, hence the discrepancy in the curve.
>>
Eddie
It could be that you are pressing too hard. If you use fresh sandpaper 
very little downward pressure is needed to do the job, alternatively you 
could try using a wider sanding block that will "bridge" the dip.

Paul