">I still need to find out why my Amp. Gauge shows about a 10-12
Amp.>discharge when the Master Switch is thrown and every other circuit is
still>off including the radio's. This is probably unrelated to the RF
problem?
I suspect this is the case. If you have an ammeter that
shows "discharge" I presume your system architecture is
something other than one of those illustrated in
Appendix-Z? Bob . . ."
There is another posssibility while remote can be a cause. If
there is an item in the garage which resonates at the frequency chosen and
which has a diode junction (corrosion), it can re-radiate at a wide range of
frequencies and swamp the spectrum. In a restricted area this could be a
cause. There are several famous precedents for this.
ferg
|