Re: Europa-List: Attn Jabiru engined Europas

[ivor.phillips <ivor.phillips@ntlworld.com>]

 I can only find the torque settings for the 2200 engine hope they are of
some use,

ivor phillips

XS486

      Part
      Nom. Dia (mm)
      Torque

      nm   (ft.lbs)

      9.0  TORQUE SPECIFICATION FOR BOLTS & NUTS

      Spark Plugs
      12mm
     11   (8)

      Cylinder Head Bolts
      5/16"
     34   (24)

      Crankcase Main Studs
     3/8"
     40   (30)

      Flywheel/Gear Bolts
     1/4"
     20   (15)


     5/16"
     24   (18)

      Crankshaft Prop Flange Cap Screws
(Lockwire)
      3/8"
     40   (30)

      Oil Pump Cap Screws
     5/16"
     20   (15)

      Tappet Cover Cap Screws
      1/4"
     7   (5)

      Starter Motor Bolts
      5/16"
     20   (15)

      Carburettor Flange Bolts
     1/4"
     11   (8)

      Engine Mount Plate Bolts
      1/4"
     14   (10)


      5/16"
     16   (12)

      Gearbox Cover Bolts
      1/4"
     14   (10)

      Alternator & Coil Mount Bolts
     1/4"
      14   (10)

      Sump Cap Screws
      1/4"
     14   (10)

      Conrod Bolts
     8mm
     14   (10)


     5/16"
     24   (18)

      Propeller Bolts
      1/4"
     9.5   (7)

      Camshaft Gear Bolts (Lockwire)
      1/4"
     16   (12)


----- Original Message -----
From: "Ed" <bizzarro@easynet.co.uk>
Subject: Europa-List: Attn Jabiru engined Europas


>
> Guys
>
> We have fitted the Prop extension boss on to the engine. We cannot find
the
> torque info required for the bolts that hold this boss on. Any ideas? I
> think that it is 30 ft/lbs but I don't want to guess.
>
>
> Cheers
>
> Eddie
>
> SouthEastLondonFlyingGroup
> Europa Classic Jabiru 3300
>
>