Subject: | Main Pitch Push-Rod Movement |
---|---|
From: | RWM-SYSTEMS <raimo.toivio@rwmsystems.fi> |
Date: | Sat, 23 Mar 2002 23:01:18 |
Hi All, My sticks move fore-aft 280 mm and main pitch push-rod movement is about 30 mm. Is that OK? In Manual they say tailplane TE should move 14 degrees up and 6 degrees down. I could not find equivalent main pitch-push rod movement. Also, I have only bolted my CS09. Should they also be bonded /floxed or flox beded? Cheers, Raimo #417 Raimo M W Toivio RWM-SYSTEMS 37500 Lempaala, FINLAND tel +358 3 3753 777 fax +358 3 3753 100 gsm +358 40 590 1450 www.rwm-systems.fi raimo.toivio@rwm-systems.fi |
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | Re: voltmeter vs ammeter [was: LEDs], Fred Fillinger |
---|---|
Next by Date: | Good news and bad, kbcarpenter |
Previous by Thread: | Re: Main Pitch Push-Rod Movement, Cliff Shaw |
Next by Thread: | Good news and bad, kbcarpenter |
Indexes: | [Date] [Thread] [Top] [All Lists] |