Message text written by "Jacqui"
>can anyone help me to find the cramp needed for fitting the navaids wing
leveler onto the torque tube? PETER MILEHAM Builder 407
<
One is easily made as follows:
1. Buy an extra CS03 from Europa.
2. Cut it in half longitudinally and discard one half.
3. Make a crank arm as described in the mod instructions but omit the lower
half of the big end.
4. Attach the crank to the CS03 with rivets/Redux.
5. Attach the unit to the torque tube using Redux.
6. After cure back up the Redux with rivets. Be careful that the rivets
don't interfere with the inner torque tube by fitting them in the 10 and 2
o'clock position.
Nigel Charles
|