Re: AW: Advice please

[Paul & Liz Atkinson <paulliz@cix.co.uk>]

In article <14AA2F2310574-01@eMail-Firewall>, 
113-23@auswaertiges-amt.de () wrote:

> (1) heat up the area with a hair-dryer and wait 
for the 
>     composite to become soft. You could then 
press the
>     bubbles into a flat position.

Having flattened your bubbles you could then 
syringe some epoxy between the layup and the 
foam. Drill two small holes one to allow the 
epoxy in, and the other should let the air out.
 You could also try using an iron but don't tell 
your wife!

Regards 

Paul Atkinson