Gents,
I'm about to redo my TP-12 / TP-13 set up for my stabilators due to a
change in torque tubes. (My original tube's nickel plating was
peeling.) I've discovered the new right and left TP-12's are offset by
approx. 1.5 degrees in the horizontal plane. Using a spirit level
instead of the hypercritical digital device, I see a difference of half
a bubble.
So, is this a big deal requiring some kind of adjustment, or do I aim
for the middle and be done with it?
Thanks in advance,
Steve "Second time around" Genotte
http://home.sprintmail.com/~gopack/Mainpage.htm
|