Very nicely timed. Thank you.
Tony
wrote:
> >>>The router is also useful in setting the rebate depth in the foam around
> >>>the
> >> edge of the aileron bellcrank access window once the top glass is
> >> removed.<<
> >
> >I can't think of any reason why this rebate should not be put in BEFORE the
> wing
> >skin goes on. Ramp the sides of the rebate so the biaxial will sit down
> easily.
> >All you have to do then is build up a flox fillet to suit the cover plate and
> >the job's done.
> >Any comments Andy?
> >Graham
> >
> >
> Quite right Graham.
>
> As the manual does cover a method for making the access hole (in the aileron
> chapter), and as there's not enough time in the day to start revamping it, I
> don't envisage altering things at this stage I'm afraid.
>
> I'll put it on my "things to do" list though.
>
> Andy>
> -------------------------------------
> Web Site at www.europa-aviation.co.uk
> Fax No 44 1751 431706
> -------------------------------------
>
>
---------------End of Original Message-----------------
--------------------------------------------------------
Date: 01/13/97
Time: 07:58:54 New Zealand Summer Time (UTC +13)
Kaon Technologies - Building Tomorrow's Networks
PO Box 9830
Newmarket
Auckland Ph +64 9 358 9124
New Zealand Fx +64 9 358 9127
Visit http://www.kaon.co.nz
--------------------------------------------------------
|