Hi All, I am planning to spray Zolatone on my interior and maybe in the future add some upholstery to parts of the inside. Some questions: Will an ordinary Campbell Hausfield sprayer nozzle be large
Thanks Jim, Never thought to look for a website for instructions. I was wondering, will your windows or windscreen already be installed when you spray or will you just mask the paint when redux squee
Bob, Did Cliff ever perfect a way to use your servo with the MAC (ray allen) stick grip switches. If so, I would be interested in details. Wait...was that it or some other problem he had to overcome?
Paul, I think I experienced what you are talking about. I ended up with the following ingredients: a slight thinning of each of the pieces to decrease thickness, filling up to them with superfil on t
Cliff and all, Everytime I order I end up with the stuff being too thick to lay down in and around corners. Wish I knew where that dark blue stuff about an inch and half wide came from. It was thin t
Hi Paul, Was the second coat applied at the same time as the first or or as Graham described; a fresh coat over an old coat? Also, did you apply yours with a brush or paint sprayer? Troy Maynor N120E
Hi All, I have read where some have ended up disconnecting the static source and using the static cockpit air for the flight instruments and it work fine if not better. I am contemplating not even in
I think it was someone at the factory that told me. Look at Rutan Fiberglass Cloths on page 30 in the '03-'04 ACS catalog. Part number RA7725. It is the same as factory I was told and I can't see any
Peter, How were you able to get the pitch push rod out of the plane? Troy Maynor N120EU Monowheel Classic Left to finish: Paint,interior,engine install, wiring.
Thanks. Just Curious, hope it is a non issue but future inspections are definitly important. Troy Maynor N120EU Monowheel Classic Left to finish: Paint,interior,engine install, wiring.
Peter, I have the same engine setup as you mention (except mine is 912S Classic). I was thinking I would just barely have room for the Skydrive hot water system. Is this the one you mean or the Rotax
Peter and All, Sorry, I had a brain fart. I was harkening back to the days of my 2-cycle Rotax that you could put an electric one on that ran straight off the lighting coil. CPS had (has?) it in thie
Hi Ira, Did you use the primer that came with the Imron or UV Smooth Prime or both? Troy Maynor N120EU Monowheel Classic Left to finish: Paint,interior,engine install, wiring.
Ditto this from me. I live near Asheville, North Carolina. If an empty seat of a Europa passes within a hundred miles of me I would be happy to meet someone headed North and buy the fuel. Troy Maynor
They make CHT sensors that go between the spark plug and head. Troy Maynor N120EU Monowheel Classic Left to finish: Paint,interior,engine install, wiring.
Hi All, Being a builder of a classic, I am wondering how this affects me and why I have not heard of pip pins being used. Am I to redux a hard washer to the starboard spar tip and buy a pin. Guidance
Kingsley, Thanks for clearing that up. Yes I still have the 3/8" pins and do not plan on the MAUW mod at this time unless I am convinced other wise. I am way past where it would be easy to get it in.
Tony, Rocky Mountain Instruments has them. Check with John Wigney on how to get away with using only one even with the return fuel line installed. Troy Maynor N120EU Monowheel Classic Left to finish: