Hi Folks, I need help from those of you that have remotely mounted your oil pressure switch. Can you tell me the size of the fittings and hose and/or manifold that you used to connect? I plan to moun
Hi Folks, Anyone ever hook up the recommended tach that goes with a Rotax 912 in parallel with one that's part of an engine monitor? My panel was built and wired a few years ago with the Mitchell tac
Hey Fellow Europa Folks, Hope all are flying or building well. Question: for you that have put wing walk on, how wide a path is best up the wing? ACS sell some that is clear and is 16" x 30" and anot
Hey All, Is it ok to lag, or wrap some kind of heat shield around part or all of the exhaust pipes? Mine is a classic FWF with stainless steel pipes. I wanted to keep a few areas cooler, like near th
Hey Folks, Can someone who has one, tell me at what airspeed the switch for the factory stall warner closes and at what speed it opens? Is it a definite open and close or is it a variable arrangement
Hey All, I was considering using a high density poly foam, (gray in color) to do the initial build up of the seats instead of the blue foam we built the plane with. I am looking at 4 inch stuff in th
Hey Y'all, Just a minor thing but I want to know. I want to talk about the little plastic 'T' fittings that connect the carburettor vent tubes to the plenum. Mine are missing. I don't know if I even
Hey All, I need help finding the hardpoints for the harnesses. I put off drilling and when it came time to prime and paint it was overlooked. I have the ones at the tunnel drilled however. If someone
Thanks Duane, I found the ones in the fuselage. I am comfortable I found center too. How about the piece in the back of the headrest? Where is the center for the bolt there? Troy Maynor Visit - www.E
Hi All, I need information on the OR2 nylon outrigger length. According to the archive in issue 21, page 17, the length should be 315mm between OR1 and OR3. This applies to XS aircraft and Classics w
Hi Again All, I am about to put brake fluid in and bleed the system. Before I do, I want to make sure the data I found in the archive is correct. I read that DOT 5 silicone is good for ALL types of s
Hi All, I hesitate to bring it up but I'd like to know. I have this 5ml bottle of Loctite 648 with only German language on it. I can't remember where I used it, or if I have still to use it on someth
Hey All, I can't seem to locate an owners manual for the XS monowheel on the Europa Club or Factory Site. I have a classic monowheel, but with the extended baggage bay and the tailwheel move/mod. I a
Hi All, I desire to build a control lock for the rudder. Searching the archive I found the good idea of the pvc pipe assembly that goes onto the pedals and back to the stick or seat edge maybe, howev
Hi All, I want to get a tow bar for the tail wheel of my monowheel classic, but it has the XS tailwheel design. Can anyone direct me to one that is light-weight, collapsible, and reasonably priced. I
Roland, I know it's not in the UK but here is the switch I used on mine and it works well. Oil pressure idiot light that also says "Hey dummy you forgot to turn off your master switch", and runs the
Hey Guys and Gals, When folks talk about lifting a Europa by the engine mount are they referring to the mount forward of the lord mounts or aft of the lord mounts? I need to lift my Classic monowheel