I had a pump (mechanical)go on my 912 apparently they don't go often. they sound as if they are broken if they are - duh - if that makes sense. Will Blockage from the tank? I have had this. Kevin dif
Can anyone send me a picture of their bus bar/advise me on the best option. The ones that come with the Europa wiring kit seem to be plastic domestic terminal blocks with one side (as it were) liked
Thanks to all for input this wiring/instrument thing is pesky Will I did the same as Frans, used brass bolts through the firewall as the main star points, I fed 5 wires with ring ends through a hole
Having had several attempts at the wing lift pins I need some new 1/4 and 3/16 hex machine screws - of the same characteristics as the originals obviously Can anyone give me a source and part number
I used strong aluminum angle bolted to the two flap hinge arms and the cross tube hinges using 4 identically drilled brackets of the same stuff. If that makes sense. It held everything aligned while
No sadly not .mainly because Im based in SKGY (Guaymaral Colombia)J But thanks anyway. Can you send pics please? It seems that most people have simply created a trailed based on common sense which is
Great - thanks Will Will The drawing I sent was the basic trailer. My trailer also has:- 1) Car battery, solar panel for charging, interior lights 2) Electric winch, 12 Volt power point for electric
Thanks Bob William, I have an alternator mounted to the vacuum pad. It is supposed to be rated around 40 amps but in this installation it probably is rpm limited to around 25 amps. Nothing to sneeze
Frans Thank you Will I have one. If you go that route, I would recommend you to split your battery into two smaller ones, so you have two totally independent electrical systems. This gives total redu
Picking up on the deterioration of the hardner - do you have data on that? How many months? Does anybody have a realistic idea how long unopened 420 is good for? Stored at over 70f Will
A question for the assembled wisdom...do the PTT wires need to be shielded? As I understand it the standard is a 3 core shielded wire for each headset . Audio: white cores and shield/earth . Mic: 2 c
Bud Can you give an overview of the tank replacement surgery. My tank has been sitting around empty during my (glacial-paced) build and has been glassed in per the manual since 2008 and not per your
Bud Thanks.always love the asides in your mails. Will PS sorry to hear flooded - it seems to have been a bad 6 months form the elements for you. Will, Sorry it has taken too long. Much to do and too
My congratulations too Will Jim, we wish you many safe and extremely high satisfactory flying hours. Marke & Raimo Toivio from Finland OH-XRT From: Fred Klein <mailto:fklein@orcasonline.com> Sent: Th
Brave man to fess up Dear Frans, Remi, Brian and all who were interested Thank you for your Very interesting messages (they are below). During last three days my engine (912S) has got his 250 hrs ser
I am hoping that someone can help with this. Does anyone one know if the EUR 044 and 045 hex socket screws for the rear lift pin socket can be obtained from (for example) mcmaster and if so what part